Star Tech 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader

This item comes with a 2 Years warranty

Star Tech 3.5in Drive Bay IDE to Single CF SSD Adapter Card ReaderThis Compact Flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM Micro Drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive. The CF/IDE adapter can be installed in the computer case through simple mounting in an available 3.5in drive bay, for connection to the computer IDE bus through either a 40 or 44-pin connection. Designed and constructed to provide a reliable media card platform, the CF IDE adapter

Physical Characteristics
Product Width  : 10 cm [3.9 in]
Weight of Product  : 129 g [4.6 oz]

Prominence
Description CDW 75 - 1st Line  : StarTech.com 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader

Software
OS Compatibility  : OS independent; No software or drivers required

Special Notes / Requirements
Note  : This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards.

What's in the Box
Included in Package  : 3.5” Enclosure
Compact Flash to IDE Adapter

Physical Characteristics
Product Length  : 97 mm [3.8 in]
Product Height  : 25 mm [1 in]

Performance
Memory Media Type  : CF (Compact Flash I/II Card)
Maximum Data Transfer Rate  : 133 MBps

Packaging Information
Shipping (Package) Weight  : 215 g [7.6 oz]
Package Width  : 48 mm [1.9 in]
Package Length  : 22 cm [8.7 in]
Package Height  : 15.8 cm [6.2 in]

Hardware
Interface  : IDE

Environmental
Storage Temperature  : -55°C to 85°C (-67°F to 185°F)
Operating Temperature  : -55°C to 85°C (-67°F to 185°F)
Humidity  : 5% ~ 85% RH

Connector(s)
Host Connectors  : SP4 (4 pin, Small Drive Power) Male
IDE (40 Pin, EIDE/PATA) Male
Drive Connectors  : CompactFlash (50 pin) Slot

What's in the Box
Included in Package  : Full Profile Expansion Slot Bracket
Instruction Manual
SP4 to LP4 Molex Power Cable