PM45-4G 4G GPRS & IP DIALLER PERMACONN

Standard Consumer Warranty

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station. The PM45-4G is a versatile alarm communicator that reports on 4G, GPRS and IP to the Central Station. This unit can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/GPRS in the event of a wired ethernet failure. If no IP connection exists the communicators will report on GPRS or 4G/3G only. Remote alarm panel Upload/Download available using GPRS/3G/IP Dual SIM + IP alarm communicator, Plug & Play solution, Interfaces with any Contact ID alarm panel, 1 input + 1 output, function control using Atlas and/or Pocket Secure, Low-cost hardware solution for NBN or Naked DSL services, PM45-4G communicates on 4G & GPRS networks Small size - Fits inside alarm panel enclosure and suitable for ATM & M2M applications Secure VPN within Optus & Telstra networks - Dedicated to Permaconn events only AES128 encryption for alarm data - Secure transmissions over the public internet High-speed RS232 Interface - Future development PM45-3G acquires an IP address automatically using the customers DHCP service. No IT headache Various diagnostic LEDs - Easy installation Activate, commission and diagnose using Atlas - Seamless installation process Three (3) dedicated paths of communication - Uptime in excess of 99.9% Internal watchdog reset function - No unnecessary service call-outs Monitors & reports dialler interface lead status -Panel dialler to Permaconn interface secure AS/NZ2201.5:2008 compliance Outputs can be configured to arm/disarm the alarm system, control gates and lights. Pocket Secure a smartphone app controls these functions.